Proxxon 34108 Micro Mill FF 230

Poly-V drive system provides speeds of 280, 550, 870, 1,250, 1,700 and 2,500-Rpm 

Hand wheel serves as both height adjustment and fine mill feed

Precision engineering produces dimensions of 20-Inch overall height, table size of 10-5/8-Inch by 3-5/32-Inch and 41-Pound

Proxxon micro mill FF230 is a small, accurate milling system used to mill, drill, and countersink steel, cast iron, aluminum, brass, and plastic. The headstock swivels through 360-Degree indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as a fine feed when milling. One revolution equals 1/32-Inch (1mm) travel, 1 division equals .002-Inch (0.05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64-Inch, 5/16-Inch and 25/64-Inch (6, 8, and 10mm). The solid table has a size of 10-5/8-Inch by 3-5/32-Inch (270 by 80mm) and is T-slotted to 15/32-Inch by 15/64-Inch by 13/64-Inch.